パーツ整列機 株式会社ウエステック JAPANESE Site→

Parts Aligner Westech Co. Ltd











Product Introduction


The MRV Aligner is capable of aligning micro-miniature parts while remaining independent from the production line.

Simultaneously preparing the aligned parts for inspection and assembly, the MRV aligner greatly improves the efficiency of production.
Each pallet is specifically designed and created with extreme precision to suit the needs of our customers.
Main specifications of MRV series
Standard Parts Aligner MRV-MINI-S Basic MRV series models
Manual-Type Parts Alligner MRV-MINI-M Manual-Type.
Horizontal Counteraction Part Aligner
(single-head)
MRV-I-STS Features built-in vibration reduction balancer. Suitable for setting lines of odd numbers.
MRV-II-STS
MRV-III-STS
Horizontal Counteraction Part Aligner
(double-head)
MRV-I-STW Realizes the highest vibration stability among MRV series by canceling vibration with two heads.
MRV-II-STW
MRV-III-STW
Rotary Parts Aligner MRV-MINI-SR Suitable for alignment of specific parts with rotary vibration.
MRV-II-SR
Vacuum-Type Parts Aligner MRV-MINI-SV Realizes high-density alignment by air absorption.
MRV-I-STW-V
MRV-II-STW-V
Vertical Oscillation Parts Aligner MRV-II-VAS Vertical Agitation System.
Control Panel MRV-CMO Main body movements are set from the control panel.
Size and number of vibrations, table inclination and time can be programmed to suit the types of parts and alignment pattens.
Up to 10 processing patterns can be memorized.
Vibrating Work Stand MVV-II For fast large-scale assembly.
MVV-II-VAC
Optional Items
Rotary Vibration Machine MVV-IRR This machine applies rotary vibration to parts. It is used for parts positioning in screw tightening operations.
Vacuum Unit MVAC-IB Using a large blower as its vacuum source, the vacuum unit can draw in hundreds or thousands of parts.
Vacuum Hand -

Vacuum hands are used in combination with the vacuum unit. They are custom designed to fit the parts to be aligned.

Screw Lineup Jig - Screw lineup jigs make it possible to manually align screws or header parts in a short time.
Magnet Hand - Magnet hands are used for assembly using loaded jigs. A magnet is employed to simultaneously draw in multiple parts.

Copyright (C) 1997-2010 WESTECH CO., LTD. All rights reserved. *TOP PAGE*